DN25 class B Amr Smart Lora Water Meter for house
Product Description
DN25 class B Amr Smart Lora Water Meter for house
Brief introduction
LoRa wireless water meter adopts advanced wireless transmission technology, which transforms information of conventional mechanical water meter into electrical signal that stored by micro-electronics control circuit. It is able to automatically read the metering data via wireless remote network and control the close and open of the valve.
Product features
·our lora water meter has high accuracy
·Type:dry dial/screw/seal
·Material:brass
·Scenes to be used:Public utilities
·waterproof level:IP68
·Technical data conform to international standard ISO 4064.
·Accuracy:class b
·Water temperature: 0.1℃~50℃ ( 0.1℃~90℃ for hot water meter).
·communication:wireless remote
Outline dimensional drawing
| Nominal Diameter | Length L | Length L1 | Width B | Height H1 | Height H2 | Connecting Thread | |
| mm | d | D | |||||
| 15 | 258 | 165 | 90 | 112 | 184 | R1/2 | G3/4B |
| 20 | 299 | 195 | 90 | 112 | 184 | R3/4 | G1 |
| 25 | 345 | 225 | 90 | 114 | 186 | R1 | G11/4B |
FAQ
FREQUENTLY ASKED QUESTIONS
1. How long is the battery life?
Using ER26500 batteries with a capacity of up to 9000 mAh and the frequency of reading meters once a day, the battery life can reach up to 8 years.
2. Waterproofing grade?
At present, the LoRa wireless water meter adopts the technology of full encapsulation and sealing. It uses the silicon gel packaging circuit board part, and the battery plug and socket is also sealed to reach the IP68 protection level.
3.Can your product run underwater?
This product can be soaked in water, but soaking in water will affect the stability of signal transmission, because the signal transmission in water will be greatly affected
4. Can you make Lora ultrasonic valve-controlled water meter?
No, because the built-in valve will have a greater impact on the stability of the ultrasonic measurement, the higher the frequency of the switch valve, the greater the impact on the accuracy of measurement.
5. If the valve cannot be closed or opened, how can it be found and handled?
If the valve is blocked by sand and gravel flowing into the pipeline, the program in the water meter will try to execute the action of the on-off valve within 40S.
If the valve can not be switched normally, the water meter will give up the instruction and return the failure data to theplatform.
On the platform, the relevant information of the water meter can beviewed for the convenience of the management.