LoRa Smart Water Meter Remote Reading Apartment

LoRa water meter

 

 

Main functions of LoRa smart water meter

1. Remote reading: Periodically report the readings of the report meter actively.

2. Remote valve control: the valve can be closed and opened remotely.

3. Early warning function: alarm prompts such as battery undervoltage, abnormal metering, and pre-order volume reaching the threshold, and different emergency water consumption can be set according to different users.

4. Large-capacity storage: It can store up to 24 months of monthly frozen data and 31 days of daily frozen data.

5. Ladder water price: The water price can be set with different benchmark prices and tiered prices according to the user category and consumption.

6. Data supplementary upload function: When the data upload is unsuccessful under special circumstances, the unsuccessful data upload will be automatically supplemented in the next upload.

7. The water meter can collect data information such as accumulated water consumption in real time through the management software, or copy and collect the accumulated water consumption frozen on each day of the last month and the monthly water consumption in the last 24 months.

LoRa smart water meter installation requirements

1. The diameter of the water meter should be determined according to the diameter of the installed pipeline and the frequently used flow rate is less than or close to the common flow rate of the smart water meter. The installation location should avoid exposure to sunlight, flooding, freezing and pollution, and should be easy to disassemble and read.

2. Horizontal installation The water meter should be installed horizontally (display side up). The vertical installation of the water meter should display the face upwards and install it on the vertical pipe.

3. Before installing a new water meter, sand, gravel, hemp and other debris in the pipeline should be removed. To avoid water meter failure.

4. The direction of the arrow shown on the water meter should be consistent with the direction of the water flow in the pipeline.

5. The installation location of the water meter should be far away from the air conditioner compressor, induction cooker and other strong electromagnetic interference electrical appliances. Avoid installing in a metal box or surrounded by metal objects.

6. If the water meter is installed at the water inlet end of the boiler, to prevent the backflow of the boiler hot water and steam from damaging the internal parts of the water meter, it is best to install a check valve at the water outlet of the water meter.