LoRa Water Meter Wireless Remote Domestic

LoRa water meter

 

 

Brief introduction

LoRa wireless water meter adopts advanced wireless transmission technology, which transforms information of conventional mechanical water meter into electrical signal that stored by micro-electronics control circuit. It is able to automatically read the metering data via wireless remote network and control the close and open of the valve

Product features

·our lora water meter has high accuracy

·Type:dry dial/screw/seal

·Material:Cast Iron/brass

·Scenes to be used:home/apartment/domestic/indoor/house/residential/housing/garden/housing/commercial/general household/residential building/for residence/apartment /municipality/household/potable/domestic residential

·waterproof level:IP68

·Technical data conform to international standard ISO 4064.

·Accuracy:class b

·Water temperature: 0.1℃～50℃ ( 0.1℃～90℃ for hot water meter).

·fitting:Concentrator/Repeater/connctor/PCB/valve control/strainer/reading device/valve actuator/plastic cover/battery operated/coupling/pointer/components/counter/accessories/register/ball valve

·communication:lora/wireless remote/local internet/Private Protocol

LoRa valveless meter function

1. Retain the mechanical display mode, which is convenient for users to check the water consumption intuitively.

2. The electronic reading can automatically upload data to the server through wireless network remote communication, which can realize remote data monitoring.

3. Using wireless communication, it is easy to install without wiring.

4. When the mechanical reading cannot be read normally, or the battery power is low, the water meter will actively upload the abnormal state to remind the management department that the water meter has failed.

Dimension

Maximum permissible error:

1. From the minimum flow-rate (Q1) inclusive to the lower zone of the transitional flow-rate (Q2) exclusive: ± 5%.

2. Water temperature ≤ 30° C from transitional flow-rate (Q2) inclusive to the higher zone of the maximum flow-rate (Q4) exclusive: ± 2%. (hot water meter >30° C± 3%)

As the China’s leading smart water metering system provider , we have developed a comprehensive water meter and the smart metering system range for the Domestic market, Commercial, Agriculture and Industrial . Moving with the changes in IOT technology and more higher precision metering, we are adding more research cost on reduce NRW (Non-Revenue water), improve the high-efficiency using on water.

Today, we have many partners from all over the world with long time cooperation. Since 2019, for provide much more better services, we have started to go abroad, investigating local water metering markets，start some pilot projects and visiting our regular and new customers and for provide better products and services.

We never can't forget the mission from S.H.Meters" To be the leader for water metering system in abroad market". In future, we will do more in water saving, precision metering and intelligent control of water management.

Why choose us ?

1.Professional R & D team support the customization request including the meters parts, various signal output, the data management system and charge system. The aim is to achieve the water metering system localization .

2.We have a strict quality management system, and experienced technical engineers are in charge of production and calibration, so as to ensure the quality of each water meter before delivery. For regular order provide each water meter test result and inspection report.

3.About the delivery ability side , we have stable stock. For sample and trial order, we have the special production line to make sure the fast delivery. and large orders also can guarantee the delivery time.

4.Our fund is guaranteed, the payment method is flexible.

5. As to the after-sales service system, we are building the complete after-sell services station in overseas markets and looking for more local partners can start the cooperation with us.

For public utility:

1. Through market research, we can understand the main problem for the current leakages and which is be solved urgently, such as basic measurement, charge management or main pipeline leakage.

2. Investigate the local water quality, water pipe network, network signal coverage, local residents' payment habits, managers' charging logic, etc., and design and develop water meters, networks and charging systems suitable for the local market

3. Assist in pilot, sample test and installation for water metering system

4. Support localized factory building, assembly, calibration and production according to actual needs

5. International project financing services can be provided according to actual needs

6. The water meter conforms international standards and certificates and can participate in international bidding

7. It can provide actual use, on-site installation, training guidance, etc

8. The warranty period of the water meter can be extended according to the requirements of the water department

9. Key customers and markets can provide localized service teams to achieve more efficient and direct on-site service requirements

For  Contractor:

1. Investigate the actual installation site, such as water meter installation location, length requirements, signal laying, anti freezing, anti magnetic interference and other requirements, and give specific systematic solutions such as water meter selection, signal selection,etc.

2. Customized development of charging software and water meters can be carried out according to the actual project needs.

3. According to the project budget, various solutions such as mechanical meters, ultrasonic water meters and various intelligent remote water meters can be provided.

4. The water meter conform international standards and certificates, and can meet the requirements of the municipal water department

5. Assist in pilot, sample test and installation

6. Various flexible payment methods can be selected

7. Large raw material inventory and fast delivery time

8. The warranty period can be extended according to the requirements of the water department

9. Key customers and markets can provide localized service teams to achieve more efficient and direct on-site service requirements

For manufacturers:

1. Long term and exclusive cooperation agreements can be signed to protect the local manufacturer market

2. We can help customers fully realize the needs of localized assembly by providing equipment, technology and accessories, training, etc

3. Assist manufacturers to develop water meters, software and charging systems suitable for the local market according to needs

4. Assist in applying for localization certification

5. Cooperative bidding

6. Jointly participate in local exhibitions and assist in market development