Lora Water Meter Residential R100 Dry Dial
Product Description
Lora Water Meter Residential R100 Dry Dial
Brief introduction
LoRa wireless water meter adopts advanced wireless transmission technology, which transforms information of conventional mechanical water meter into electrical signal that stored by micro-electronics control circuit. It is able to automatically read the metering data via wireless remote network and control the close and open of the valve.
Product features
·our lora water meter has high accuracy
·Type:dry dial/screw/seal
·Material:Cast Iron/brass
·Scenes to be used:home/apartment/domestic/indoor/house/residential/housing/garden/housing/commercial/general household/residential building/for residence/apartment /municipality/household/potable/domestic residential
·waterproof level:IP68
·Technical data conform to international standard ISO 4064.
·Accuracy:class b
·Water temperature: 0.1℃~50℃ ( 0.1℃~90℃ for hot water meter).
·fitting:Concentrator/Repeater/connctor/PCB/valve control/strainer/reading device/valve actuator/plastic cover/battery operated/coupling/pointer/components/counter/accessories/register/ball valve
·communication:lora/wireless remote/local internet/Private Protocol
Outline dimensional drawing
Dimension
| Nominal Diameter | Length L | Length L1 | Width B | Height H1 | Height H2 | Connecting Thread | |
| mm | d | D | |||||
| 15 | 258 | 165 | 90 | 112 | 184 | R1/2 | G3/4B |
| 20 | 299 | 195 | 90 | 112 | 184 | R3/4 | G1 |
| 25 | 345 | 225 | 90 | 114 | 186 | R1 | G11/4B |
Technical specifications
| Item | Unit | Details | ||
| Nominal diameter | mm | 15 | 20 | 25 |
| Q3/Q1 | R80/R100 | |||
| Overload flow(Q4) | m⊃3;/h | 3.125 | 5 | 7.875 |
| Nominal flow(Q3) | m⊃3;/h | 2.5 | 4 | 6.3 |
| Transitional flow(Q2) | m⊃3;/h | 0.05 | 0.08 | 0.13 |
| Minimum flow(Q1) | m⊃3;/h | 0.031 | 0.05 | 0.08 |
| Accuracy class | Class 2 | |||
| Maximum indication | m⊃3; | 99999 | ||
| Temperature class | T30,T90 | |||
| Pressure class | MAP 10/MAP 16 | |||
| Pressure loss class | Δp63 | |||
| Flow prefile sensitivity class | U10/D5 | |||
| Environmental class | Class B | |||
| Electromagnetic environment class | E1 | |||
| Static current | uA | <10 | ||
FREQUENTLY ASKED QUESTIONS
Water meter
1. How long is the battery life?
Using ER26500 batteries with a capacity of up to 9000 mAh and the frequency of reading meters once a day, the battery life can reach up to 8 years.
2. Waterproofing grade?
At present, the LoRa wireless water meter adopts the technology of full encapsulation and sealing. It uses the silicon gel packaging circuit board part, and the battery plug and socket is also sealed to reach the IP68 protection level.
3.Can your product run underwater?
This product can be soaked in water, but soaking in water will affect the stability of signal transmission, because the signal transmission in water will be greatly affected
4. Can you make Lora ultrasonic valve-controlled water meter?
No, because the built-in valve will have a greater impact on the stability of the ultrasonic measurement, the higher the frequency of the switch valve, the greater the impact on the accuracy of measurement.
5. If the valve cannot be closed or opened, how can it be found and handled?
If the valve is blocked by sand and gravel flowing into the pipeline, the program in the water meter will try to execute the action of the on-off valve within 40S.
If the valve can not be switched normally, the water meter will give up the instruction and return the failure data to theplatform.
On the platform, the relevant information of the water meter can beviewed for the convenience of the management.
Pre-sales and after-sales service
1. Pre-sales service
Patient product introduction.
AMR system demonstration.
Project cases introduction.
Supporting sample order.
2. After-sales service
Instalation intructions, include software parts and water meters parts;
Support data butt to the third management system;
installation supervision, commissioning ad training on site;
Keep long time follow up & services even beyond warranty time.
Communication and serve platform
1. Does the GPRS wireless water meter need a concentrator or a collector?
No, because the GPRS wireless water meter uses the existing GPRS communication tower for data transmission, which is similar to the mobile phone signal transmission.
2.How many Lora water meter can be connetted into one concentrator?
At present, the maximum carrying capacity of one concentrator is
500 pieces.
Considering the actual installation density of the community, generally speaking, it will be much lower than this number.
3.What data can the platform collect from water meters?
At present, our platform can collect accumulative flow rate, battery voltage, upload time on the water meter, and ultrasonic LoRa can also collect instantaneous flow rate.
4. How does the concentrator transmit data?
The concentrator needs 220V power supply and uses GPRS to transmit data to the PC platform.
5. How about the transmission distance?
The distance of LoRa data transmission is mainly affected by the actual installation environment. In relatively spacious transmission environment, the transmission distance can reach 1000-1500 meters.
Generally speaking, the concentrator will be installed at the commanding heights of the community.
GPRS water meter Under the GPRS signal, the data uploaded by GPRS water meter is not affected by distance.
6.How do you know that the water meter is out of order and there is no data to return?
First, we can check the alarm function on the platform to see that the water meter has no data return, and then check the installation environment to see if there is obvious damage, and can use the initiative to trigger the water meter to be on-line way.
7. Is the platform free? Can it pay in advance?
It is free, and the administrator can pre-charge the amount of money
It is free, and the administrator can pre-charge the amount of money
on the platform and set up user information files for each useron the platform and set up user information files for each user.
8. Warranty?
All meters will be guaranteed against defects in workmsnship and meterials for a period of one (1) year from the date of acceptance. Defective meters or parts discovered within this period shall be replaced without charge upon return to the S.H.Meters.