Water Meter Test Bench Ultrasonic

Basic Information

1. Device flow range: (20-6300)L/h;

2. Uncertainty of the device: ≤0.2% (k=2)

3. Equipment power: water pump 1.8KW, heating 6KW;

4. Number of inspection meters: Ultrasonic meters (DN15: 10DN20: 10 pcsDN25: 6 pcs);

5. Equipment size: length, width and height (5800 mm *650 mm *2000mm) 

Water source system

Water pump: Wilo hot water pump has a maximum flow of 8m⊃3;/h, controlled by a frequency converter, and the software can set different frequencies

Water tank: 304 stainless steel, the bottom of the water tank is equipped with a liquid level sensor, the software system can collect the current level of the water tank, is equipped with an electric heating device, and the water temperature control accuracy is ±1℃.

Pressure pump: The device is equipped with an automatic pressure device, the maximum set pressure is 2.5MPa, the pressure can be set by the software, PLC control reaches the pressure and automatically stops, and automatically releases the pressure according to the pressure holding time.

Vacuum: The device is equipped with a vacuum device, which can extract the bubbles in the wet water meter, which is conducive to image recognition.